Popularization of watch knowledge

(1)When wearing a watch, the sweat on the hands is corrosive to the case. The all-steel case is made of nickel-chromium alloy and has better corrosion resistance. The half-steel case is made of copper, which is easily corroded by long-term contact with sweat. Wipe away sweat often with a soft cloth or put a plastic watch support on it to prevent it from being eroded by sweat.

(2) Do not open the back cover of the watch at will, so as to avoid dust entering the movement and affecting the normal operation of the watch.

(3) Do not put the watch in the wardrobe with mothballs to avoid the deterioration of the watch oil.

(4) Do not put the watch on the power amplifier, audio, TV, so as to avoid magnetization.

(5) Watches that are not worn for a long time should be wound regularly every month. Watches with automatic movements should be gently swayed back and forth for a few minutes or worn on the wrist for a period of time to automatically wind up. So that the parts will not be in a static state for a long time to ensure the running performance of the watch machine.

(6) If the ordinary mechanical watch is damp, you can use dry cotton to press it on the watch, and then bake it with a 40-watt light bulb for 5 minutes, and all the moisture in the watch can be evaporated.If the quartz electronic watch is damp, you can take some small pieces of calcium chloride and wrap them with gauze; Then open the cover of the electronic watch and put the wrapped calcium chloride and the electronic watch into an airtight plastic bag or glass bottle for sealing. Generally, the moisture can be removed in about 3 hours, so that the electronic watch returns to normal. The moisture absorption time can be appropriately extended for watches that are severely damp.

(7) When receiving a beloved watch, when removing the outer packaging, be sure to keep the packaging box used to protect the watch. These packaging boxes to protect the watch can give the watch the safest protection when it is not usually worn, and prevent the watch from being broken or collided. Develop the habit of putting it in the box, which can greatly reduce the chance of damage to the watch.

(8) It is usually best not to wear the same watch every day. You should prepare several different watches to use alternately. In addition to enriching your personal style, you can also avoid dust and body dirt from concentrating on the same watch. The leather strap should be taken care of more carefully to avoid frequent wear and tear caused by daily use. Even if the surface is new, the watch will look very old.

(9) Wear the watch on your wrist to sleep. If the watch is a luminous watch, it will bring adverse effects to the body. This is because the luminescent material coated on the pointer and dial of the luminous watch is mainly a mixture of radium and zinc sulfide. The rays emitted by radium can excite the zinc sulfide crystal to emit light. Nine hours of radium radiation is harmful to the human body. Therefore, before going to bed, it is best to take off the luminous watch and put it on the table.

(10) Surface renovation. After the watch has been scratched with many lines, you can put one or two drops of water on the watch, and then squeeze a little toothpaste to rub, you can remove the scratches and make the watch as new.

I want to say Goodbye to you again.This concludes today's sharing.Thank you for your support to Window's Clock & Watch CO.,LTD .!

Click to CONTACT US-->